Copyright © 2026 J and E Engineering Services Ltd All Rights Reserved

ENQUIRIES (+44) 1706 222662 01706 222662 Telephone Daimler Specific info@250v8.co.uk General Enquiries info@jandeengineering.co.uk

J and E Engineering Services Ltd.

Unit 32 Britannia Mill,

Stoneholme Road,

Crawshawbooth,

Rossendale,

Lancashire.

BB4 8BA.


Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Sunday

8:30am - 5:30pm

8:30am - 5:30pm

8:30am - 5:30pm

8:30am - 5:30pm

8:30am - 5:30pm

9:00am - 2:00pm

Closed

CONTACT INFORMATION OPENING HOURS VAT Number GB738470805 EORI Number GB738470805000 Company Number 16821373 Websites Main: www.jandeengineering.co.uk Main Alternative: www.j-and-e.co.uk Daimler V8: www.250v8.co.uk Daimler V8: Alternative: www.250v8.com
Home

Here you will find some of the dedicated engine building tools we manufacture and some of the specialist parts and modifications specifically for the Daimler V8 engine owner.

Special Tools, Modifications & Parts Press to Select Cylinder Block Parts Engine Service Press to Select Gakets & Sealing Press to Select Special Tools Press to Select Daimler V8 Parts Cylinder Head Area

Spark Plug Tube Removal and Install Tool. D.506. Churchill designation. This tool is a much improved version of the Churchill design. It allows for simple removal and re-fitting of the cylinder head spark plug tubes without damaging or deforming them. Plug tube removal is required when replacing the seal at the bottom of the tube to prevent oil leaking. Used in conjunction with our modified sealing ring kits or complete tube with integral sealing end. Available for outright purchase or hire.

£170.00

Rocker cover nut “Puck”. To aid removal and tightening of the rocker cover hand nuts. Can be used by hand or 1/2” ratchet/T-bar thanks to the square drive hole in the centre. Shown here in yellow to aid photographic representation all pucks are supplied in black. Made from polyoxymethylene engineering plastic from Mitsubishi Industries.

£45.00

Rocker Arm Adjusting Screw Spanner/ Tappet Adjusting Spanner. An essential tool for your tool kit. This double open ended spanner is the correct imperial size for the square rocker arm adjusting screws. Adjusting the valve clearances is difficult enough and this simple little tool makes life a little easier.  Offset crank at one end and straight on the other . For all V8 Saloon and SP250 cars.

£20.00 each £29.00 Price Reduced to celebrate the  launch of  www.250V8.co.uk Now only £29.00 + P&P Special Price Info Info

Modified Spark Plug Tube Oil Sealing Ring Kit. 430742 MOD. This is a modification to help prevent oil leaking in to the spark plug tube. This can cause misfires and even a fire hazard. Our sealing ring fits inside the spark plug tube and seals using two O’rings, in replacement of the old and inferior copper washer. Kit includes eight sealing rings, eight rubber seals for the underside of the rocker cover nut and three spare O’rings if required. Will suit all Daimler V8 models, Saloon, SP250 and Majestic Major 4½ litre.

£150.00 Eight Cylinder Kit

Brand New Spark Plug Tube with Modified Sealing End. 430741 MOD. This will replace your old damaged tubes and negates the need for our modified sealing ring kit as this is already combined with the new tube. Available in single form or sets of eight tubes. Complete with O’ring seal. Replacement O’rings available if required.

£380.00 Eight Cylinder Kit

Rocker Cover Nut O’Ring Kit. 425280/25. Eight Viton rubber O’rings for the underside of the rocker cover retaining nuts. These are already included in our modified spark plug tube seal kit. Nuts not included.

£6.00 set

Second-Hand Replacement, Rocker Cover Hand Nuts. 432136/SH. Taken from our stock of nuts. Checked and vapour blasted prior to despatch. May show some signs of light damage, pitting or indentations. To replace your damaged or lost nuts. Available as a single item. Subject to availability.

£6.00 Each/Used/refurbished

Second-Hand Refurbished Replacement, Standard Spark Plug Tube. 430741/SH. Taken from our stock of tubes. Checked and vapour blasted prior to despatch. May show some signs of light damage, pitting or indentations. To replace your damaged tubes. Available as a single item. Subject to availability.

£20.00 Each/Used/refurbished

Stainless Steel Cylinder Head Water Blanking Plate Kit. 430444 Kit. These precision laser cut blanking plates will replace your rusted corroded mild steel originals. Supplied as a complete kit for both cylinder heads including gaskets & stainless steel fittings. A nice accompaniment to any cylinder head or full engine re-build

£25.00 Kit.

Rocker Pedestal Shim Kit. These shims help restore rocker geometry after valve seat cutting and/or cylinder head re-surfacing. The shims are 0.5mm in thickness and fit between the rocker pedestal and cylinder head. Supplied as a complete engine kit of 20 shims. Made from 304 laser cut stainless steel, all with oil feed hole to aid fitment. Special order shims of 0.25mm thickness available on request.

20x Shims  in kit £55.00 20x shim Kit @ 0.5mm/.020”. £75.00 20x shim Kit @ 0.25mm/.010” special order

Uprated Cylinder Head Bolt Kit. C21037 Uprated. 20x Uprated bolt kit giving much greater yield strength over the original bolt or stud & nut set up. Remember your old cylinder head fixings are 60+ years old. They may have been re-torqued multiple times and they will have stretched and will continue to do so which will relieve head gasket clamping force. Our bolt kit is the only viable option with regards head bolts/studs replacement. The standard replacement bolt available from parts specialists is not up to specification. Our in house tests have showed this standard replacement bolt to stretch and fail without reaching its maximum torque specification. You have been warned.

£350.00 Kit

Valve Guide Set with Uprated Viton Valve stem Oil Seals. 431000 431251 kit. A full set of cast iron valve guides with modifications to accept our uprated Viton valve stem oil seal for both intake & exhaust positions. Kit consists of 8x exhaust guide, 8x inlet guide and 16x valve stem oil seals. Our valve stem oil seals will last twice as long as the black nitrile version.

£165.00 Full Set 16 guides & 16 seals.

Intake / Exhaust Valve. 307358 / 307620. New valves for either intake or exhaust positions. Suitable for unleaded fuels. Sold individually.

Inlet 307358 £9.80 each Exhaust 307620 £9.80 each Info Info

Braided Oil Feed Pipe Kit C.21163 MOD: Complete kit including banjo bolts & bonded sealing washers. This kit will replace broken, leaking or blocked oil feed pipes. Built to withstand pressures up to 800psi and temperatures up to 260°C, the 3-section braided, flexible pipe is resistant to vibration and therefore wont crack or fracture like the original pipes.

Info £295.00 complete kit Info

Cranked Feeler Blades with Handles for Both Inlet and Exhaust Positions. These are the ideal companion for our adjusting spanner (above). A fixed feeler blade and handle of .011” for inlet and .014” for exhaust valve clearance adjustment. Colour coded yellow for inlet and red for exhaust. The feeler blade is cranked to allow easier use with the Daimler V8 setup. No more fumbling around with multi blade sets, just the sizes you need. Sold in pairs.

£38.00 Pair. (1x red 1x yellow.) NEW!

All prices indicated are correct at time of publication however they may be subject to change without prior notice. All prices are trade price. All parts and tools available over our trade counter or to mail order. Domestic and international shipping and packaging available at additional cost and subject to import duties & local taxes. Thank you for taking the time to look at our Daimler V8 products and tools.

Press to Select Cylinder Block Parts Engine Service Press to Select Gakets & Sealing Press to Select Special Tools Press to Select

If you wish to place an order for any of our parts, tools or consumables please send an email to: info@250v8.co.uk Please include your full name, shipping address, contact telephone number and of course the items you would like to order. We will raise a free, no-obligation quotation by return email which will include payment instructions should you wish to proceed with the order. Once paid your items will be shipped as detailed in the quotation.

Thank you for your custom

Mail: info@250v8.co.uk?subject=Daimler V8 Parts %26 Tools Enquiry

Ignition Spark Plug. Set of 8 NGK spark plugs BP6ES.

£28.00 8 Cylinder Set X8

Uprated Valve spring Set. C21687C21688MOD. Double valve springs to suit Daimler V8 Saloon and SP250. Increased seating pressure and full lift pressure over the standard originals. Valve springs can weaken with age and heat cycles resulting in spring bounce, poor valve seating and performance losses.

£66.00 Set of 16 inner and 16 outer springs

Tappet Adjusting Screw Lock Nut. 430419. These are the correct locking nuts for the adjusting screw on top of the rocker arm as per original specification. 5/16 UNF thread with 7/16 AF hexagon. High tensile with BZP. Other suppliers will provide you with a half nut with a 1/2” AF hexagon which is too big and makes tightening difficult because of the plug tube

£20.00 Set of 16 Nuts £1.50 Each

Second Hand Valve Train Small Parts. A selection of valve train components taken from our large second hand stocks. Valve retaining caps, collets, rocker arm screw adjusters, rocker arms, valve spring seats. All items checked and ultrasonically cleaned ready to fit.

Retainer Caps £5.00 each Collets £5.00 pair Rocker arm adjusting screw £8.50 each Spring seats £5.00 Choice Dowel £5.00 for cylinder head & rocker pedestal location

Second Hand Push Rod. 430754 / 430756. Push rods can be bent easily and the cups can wear. No longer available new we can supply second hand items for both inlet and exhaust positions. Ultrasonically cleaned, straightness checked and ready to fit

£15.00 each State which required. Exhaust: Long  Inlet: Short

Modified SLS Cylinder Head Gaskets. C22245 MOD. New Product modification now available. We do not manufacture this gasket we modify the only currently available single layer steel gasket and eliminate a fundamental flaw in the pressing allowing for much better sealing. Supplied as a pair. We can also modify your head gaskets. Please enquire.

£68.00 Pair

Exhaust Manifold Brass Nut Set. 422804. 16x brass nut for exhaust manifold to cylinder head fixing. 5/16 UNF. New stud kit also available.

£16.00 Set

Exhaust Manifold to Cylinder Head Stud Kit. 34005/13. 16x studs for the exhaust manifold to cylinder head fixing. Dual thread 5/16 UNC and 5/16 UNF combined. Brass nut kit also available.

£20.00 Set Manifold not included

Intake Manifold Anti-Airlock Bleed Valve Kit: This kit is supplied as a self install item that does not require the removal of the intake manifold. The valve will allow for the release of any air lock within the intake manifold resulting in correct engine cooling & cooling system pressure. Essential for all Daimler V8  cars. Supplied with drilling location template, instructions, drill bit & threading tap.

£36.00

NEW!

Brand New Thermostat Housing & Thermostat Kit c.21049 / 307548: Brand new aluminium casting fully machined & ready to fit. Kit includes correct 74° thermostat with bleed pin, stainless steel fittings & gasket. To suit SP250 and Saloon cars. Please state which required when ordering.

Saloon SP250

Saloon: £79.00

SP250: £79.00

Out Of Stock

High Chrome Valve Seat Inserts C.26302/MOD. New valve seat inserts for both intake and exhaust positions. High chrome material suitable for unleaded fuels. For the repair of damaged or worn cylinder heads. Extra deep as per original seats. Sold individually or in sets of 4 seats.

£11.50 each £40.00 set of four