Copyright © 2026 J and E Engineering Services Ltd All Rights Reserved

ENQUIRIES (+44) 1706 222662 01706 222662 Telephone Daimler Specific info@250v8.co.uk General Enquiries info@jandeengineering.co.uk

J and E Engineering Services Ltd.

Unit 32 Britannia Mill,

Stoneholme Road,

Crawshawbooth,

Rossendale,

Lancashire.

BB4 8BA.


Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Sunday

8:30am - 5:30pm

8:30am - 5:30pm

8:30am - 5:30pm

8:30am - 5:30pm

8:30am - 5:30pm

9:00am - 2:00pm

Closed

CONTACT INFORMATION OPENING HOURS VAT Number GB738470805 EORI Number GB738470805000 Company Number 16821373 Websites Main: www.jandeengineering.co.uk Main Alternative: www.j-and-e.co.uk Daimler V8: www.250v8.co.uk Daimler V8: Alternative: www.250v8.com
Home

V8 Saloon Spin-On Oil Filter Canister: Replacement Mann engine oil filter to suit our spin on oil filter conversion kit. To suit Daimler V8 Saloon.

Full spin-on conversion kit can be found in the “Cylinder Block Parts” section.

£10.00 each £10.00 each

Ignition Spark Plug. Set of 8 NGK spark plugs BP6ES.

£28.00 8 Cylinder Set X8

Rocker Arm Adjusting Screw Spanner/ Tappet Adjusting Spanner. An essential tool for your tool kit. This double open ended spanner is the correct imperial size for the square rocker arm adjusting screws. Adjusting the valve clearances is difficult enough and this simple little tool makes life a little easier.  Offset crank at one end and straight on the other . For all V8 Saloon and SP250 cars.

£20.00 each

Oil Filter Paper Element Spring. 10078.  Spring for at the bottom of the oil filter canister. To suit paper element type for both SP250, Saloon & Majecstic Major V8 Engines if yours has gone missing.

£3.50 each

Best Quality Oil Filter Paper Element for Saloon V8 Engine. 9673. A complete paper element filter kit with the correct seals and O’rings for Saloon V8 engines. We use Mann filters in our own engine rebuilds because they offer the best protection for our engines.

£23.00 each

Best Quality Oil Filter Paper Element for SP250 and Majestic Major V8 Engines. 307963/05. A complete paper element filter kit with the correct seals and O’rings for SP250 & 4.5 litre V8 engines. Includes a custom base plate seal retainer part number 10077 and two uprated plate seals part number 307963/03. Your old upper and lower seals will have become brittle with age and our filter kit is the only available option that includes all the seals you need. We use Mann filters in our own engine rebuilds because they offer the best protection for our engines.

£24.00 each

Filter Kit Contents:

High Quality Mann Filter Element

Retainer Base Plate 10077

Seal 307963/03 Qty x2

Sealing Washer 307963/07

Gasket Rubber Seal 307963/02

 Plate/Tube nut O’Ring Seal.

Heavy Washer.

SP250 Spin-On Oil Filter Canister: Replacement Mann engine oil filter to suit our spin on oil filter conversion kit. To suit SP250 & Majestic Major 4.5.

Full spin-on conversion kit can be found in the “Cylinder Block Parts” section.

Here you will find some of the dedicated engine building tools we manufacture and some of the specialist parts and modifications specifically for the Daimler V8 engine owner.

Special Tools, Modifications & Parts Daimler V8 Engine Service Parts Press to Select Cylinder Head Parts Gaskets & Sealing Press to Select Cylinder Block Parts Press to Select Special Tools Press to Select Press to Select Cylinder Head Parts Gaskets & Sealing Press to Select Cylinder Block Parts Press to Select Special Tools Press to Select

All prices indicated are correct at time of publication however they may be subject to change without prior notice. All prices are trade price. All parts and tools available over our trade counter or to mail order. Domestic and international shipping and packaging available at additional cost and subject to import duties & local taxes. Thank you for taking the time to look at our Daimler V8 products and tools.

Cork Rocker Cover Gasket as Original. Gaskets for each rocker cover made from cork. We bond the gasket to the cover using a contact adhesive and apply a smear of grease to the head side. This allows for re-use and ease of handling during maintenance when adjusting the valve clearances.

£9.00 Pair

Rocker Cover Nut O’Ring Kit. 425280/25. Eight Viton rubber O’rings for the underside of the rocker cover retaining nuts. These are already included in our modified spark plug tube seal kit. Nuts not included.

£6.00 set

Quality Impact Adhesive for Bonding of Cork Gaskets. We use this impact adhesive for bonding the cork rocker cover gaskets to the alloy rocker cover. This ensures correct fit and stops the gasket being pushed out when tightened. A smear of grease on the cylinder head side allows for the cover to be removed without damaging the gasket when required.

£8.50 Boxed Tube 30g

Brand New Thermostat Housing & Thermostat Kit: Brand new aluminium casting fully machined & ready to fit. Kit includes correct 74° thermostat with bleed pin, stainless steel fittings & gasket. To suit SP250 and Saloon cars. Please state which required when ordering.

Saloon: £79.00

SP250: £79.00

Saloon SP250

74°C Thermostat with Bleed Pin: Correct temperature, quality thermostat for all Daimler V8 engines. Integral bleed valve or “Jiggle Pin”  allows for air to be released when filling preventing air locks forming within the engine.

£12.00

C.27434 Water Pump Drive Pulley to suit Alternator: This brand new drive pulley is required when converting your charging system from dynamo to alternator. It has two different diameters as original specification. Made from steel billet and zero balanced. Original cast pulleys are often damaged, cracked or broken when removing from the water pump bearing. This is a much stronger direct replacement part made to original specification. Supplied bare metal ready to paint.

£140.00

Cranked Feeler Blades with Handles for Both Inlet and Exhaust Positions. These are the ideal companion for our adjusting spanner (above). A fixed feeler blade and handle of .011” for inlet and .014” for exhaust valve clearance adjustment. Colour coded yellow for inlet and red for exhaust. The feeler blade is cranked to allow easier use with the Daimler V8 setup. No more fumbling around with multi blade sets, just the sizes you need. Sold in pairs.

£38.00 Pair. (1x red 1x yellow.) NEW!

Engine Break-In Oil: Known here in the UK as “Running In Oil” this oil is used to help your new engine components and machined surfaces bed in whilst offering the best protection for camshaft cam train and valve train components. This oil has been proven on track and engine dynos to provide a more effective piston ring to bore seal than normal motor oil and is an essential part of the engine rebuild and initial running processes. Lower detergent and higher ZDDP (zinc) content of 3600ppm. Available in 5 quart (4.73 litres) quantities. Not for prolonged use.

Hot Rod & Classic: For use when the running in or break-in procedures are complete. This engine oil will continue to give your engine the best possible protection with good low temperature properties and will stand up to high operating temperatures. Manufactured using the highest quality base oils. Ideal for muscle cars, classic cars, and V8 engines. Not suitable for cars fitted with catalytic converters. Lower detergent and higher ZDDP (zinc) content of 2000ppm. Available in 20w-50 multi grade. 5 quart (4.73 litres) quantities. The best oil for your Daimler V8 motor.

Safe Guard Ethanol Fuel Conditioner: Made in the USA by “LUCAS” this fuel additive will help combat the adverse effects of increased ethanol content in todays modern petrols. Namely E10 and E15 the ethanol contained within these fuels can cause corrosion within steel fuel tanks and pipes, solder within carburettor systems and has even be known to damage some nylon, plastic and rubber components. Not only will this product help protect these parts it will also help protect your engine oil against the adverse effects of alcohol combustion. Available in two sizes 155ml and 473ml. 155ml will treat up to 95 litres of fuel while the 473ml can treat up to 300 litres of fuel.



5 Quart    Made in the USA   £55.00 each

5 Quart    Made in the USA   £55.00 each

155ml Bottle  Made in the USA  £6.60 per bottle

473ml Bottle  Made in the USA  £10.20 per bottle

Water Pump / Alternator Drive Pulley Wheel Aluminium C.27434: Billet 6000 series aluminium double V' pulley wheel for alternator equipped saloon cars. The lightest pulley wheel currently available for these cars. Total mass of around 766 grams 1.6kg lighter than steel equivalents, dynamically balanced, with correct threaded holes and precision honed pilot bore.

£200.00 Saloon

Info ALUMINIUM Ultimate STEEL Info

If you wish to place an order for any of our parts, tools or consumables please send an email to: info@250v8.co.uk Please include your full name, shipping address, contact telephone number and of course the items you would like to order. We will raise a free, no-obligation quotation by return email which will include payment instructions should you wish to proceed with the order. Once paid your items will be shipped as detailed in the quotation.

Thank you for your custom

Mail: info@250v8.co.uk?subject=Daimler V8 Parts %26 Tools Enquiry